In the US asphalt pavement mix producers are improving the sustainability pro_ le of roads through the incorporation of recycled materials and the use of energy-saving warm-mix asphalt technologies.
According to the latest survey of asphalt mix producers conducted by the National Asphalt Pavement Association (NAPA) in partnership with the Federal Highway Administration (FHWA), more than 67.65 million tonnes of recycled materials was put to use in new asphalt pavement mixtures during the 2014 construction
Use of recycled asphalt continues to grow
The use of recycled materials within warm mix asphalt continues to grow in the US
In the US asphalt pavement mix producers are improving the sustainability profile of roads through the incorporation of recycled materials and the use of energy-saving warm-mix asphalt technologies.
According to NAPA, over 99% of material removed during maintenance or repair activities ends up being put back to use in new pavements.
The tons of asphalt pavement mixtures produced using recycled and reclaimed materials saw more than a 6% increase from 2013 to 2014, which is a significantly greater increase than the increase in total tons of asphalt mixture produced during the same time period. The survey found that nearly 64.94 million tonnes of reclaimed asphalt pavement (RAP) and 1.71 million tonnes of reclaimed asphalt shingles (RAS) were used in new asphalt pavement mixes in the United States during 2014. An additional 73.1 million tonnes of RAP were used as aggregate, cold mix, and other road-building activities. Reclaiming and reusing the asphalt cement and aggregate in RAP and RAS saved about US$2.8 billion in 2014 compared to the use of virgin asphalt binder and aggregates.
This helps keep asphalt pavement mixture costs competitive and allows road owners to achieve more roadway maintenance and construction activities with limited budgets. Producers were also asked in the survey about ground tyre rubber, steel and blast furnace slags, and other waste material repurposed into pavements. Although national estimates of usage were not calculated, survey respondents reported using nearly 1.17 million tonnes of these materials in 2014 in the production of more than 7.2 million tonnes of asphalt pavement mixes.
In addition to increased use of recycled materials, asphalt mix producers continue to increase the use of energy-saving warm-mix asphalt technologies. In 2014, 102.65 million tonnes of warm-mix asphalt was produced — about a third of all asphalt pavement mix production. This marks a greater than 577% increase in the use of warm mix since 2009, the first year the survey was conducted. Warm-mix asphalt is produced with a range of technologies that reduce the production and placement temperature of asphalt pavement mixtures. A variety of environmental, worker safety, and construction benefits have been realized through the adoption of warm-mix asphalt. In 2009, FHWA selected warm-mix asphalt as one of the first technologies targeted for deployment through its Every Day Counts initiative.
In 15 states, more than half of all asphalt pavement mixtures were produced as warm-mix asphalt, and in six of them, more than 75% was produced as warm mix. This is an incredible rate of adoption for a technology introduced just a decade ago,” said NAPA president Mike Acott. “We are already seeing construction and performance benefits, as well as energy savings, with warm-mix asphalt. We continue to focus research and engineering efforts on the use of recycled materials, warm mix, and other innovations to make our long-lasting, high performance asphalt pavements even more sustainable.”
The survey was conducted in mid-2015. Results from 228 companies with 1,185 plants in all 50 states, along with data from State Asphalt Pavement Associations for 35 states were used to compile the report.
