Products

A special plant from Kleemann, a MOBICAT MC 125 RR, is based on the well-known MC 125 Z. The big jaw crusher from the Wirtgen Group company, based in Göppingen, Germany, makes its world première, and is used in the primary crushing stage for processing medium-hard to hard natural stone. The special feature of the plant lies in the pre-screening. As the customer wants to process particularly clayey material, a two-stage wobbler feeder is used. The approximately 160tonne plant is driven by a diesel-

SBM has introduced a new generation of vertical impact crusher rotors. The company says that the vertical impact crusher type V8 as well as the bigger model V10 can easily be upgraded by the new rotor. “Due to mounting protective cast armour plates at the upper and lower sides of the rotor, the service life of the rotor body could be prolonged by three times minimum in comparison to the old version. Repair costs are also considerably lower as maintenance has become easier and quicker,” says SBM. The newl

Atlas Copco´s new LG 504 plate compactor broadens the firm’s offering for forward and reversible models. The firm says that the unit offers high traction, particularly in wet soil conditions. The unit delivers high frequency centrifugal forces and amplitude. The firm says that the new model also features better ergonomics and improved access for service and maintenance. A key feature for the LG 504 is its compaction indicator, which helps to prevent over-compaction and ensures better results. The new mod

AUSA claims that its Taurulift T 144 H Plus is the lightest and most compact telehandler on the market. The T 144 H Plus is a light telehandler of just 2.4tonne but is well distributed between the two axles. It makes it possible to work on fragile ground or even to be transported on a trailer. Rear steering wheels facilitate loading tasks with a turning radius of less than 3m. It handles loads of up to 1,350 kg at a maximum height of 3.9m. This machine can reach horizontally 2.2m with a 550kg load and

Wacker Neuson is expanding its zero-emissions series with the introduction of a range of battery-powered rammers. The AS30e and AS50e vibratory rammers join the firm’s zero-emission line-up. The company is also unveiling three additional vibratory plates, the DPU80, DPU90 and DPU110. There will also be a remote-controlled version of the DPU90R on offer, using infra-red for the remote control handset.

Accurate evaluation of soil characteristics can be achieved using the new TRITECH package from Wykeham Farrance. The firm is the soil mechanics division of CONTROLS Group and its electro-mechanical TRITECH machines are said to be a suitable solution for advanced and research laboratories that want to perform high quality tests at high levels of productivity. Based on heavy duty triaxial load frames, with advanced electronics and high quality components, the frames are the top of the currently available rang

Magni TH developed a rotating telescopic model which is among the highest-reaching in the world. The RTH 5.39S is a medium-size chassis and scissors stabilised. The chassis is the same as the RTH 5.30S and has been reinforced to resist the big stress of working at extreme height. The 38.7tonne machine has a maximum lifting capacity of 2tonnes, allowing a reach of up to 13 floors. The transmission is composed of a Euro 4 final Mercedes Engine with 170kW one Bosch Rexroth hydrostatic piston pump and a Bosc

CONNECT from Mecalac is a new quick coupler system being launched on the company’s new 12MTX, 10tonne wheeled excavator. The coupler system can be operated from the cabin, and says Mecalac, the loss of an attachment is virtually impossible. The system reduces by 70% the weight of the previous Mecalac quick coupler, and it can be used to pick up all types of attachments, buckets, shovels, loading forks or hydraulic attachments.

Hinowa is replacing its Goldlift 14.70 IIIS aerial platform with the Lightlift 15.70 Performance IIIS, the fourth model in the Performance IIIS range. The machine has a maximum working height of 15.4m with a horizontal outreach of up to 6.6m. Basket capacity is 230kg throughout the working envelope and the basket comes with rotation as standard. Three power sources are available, including a 7.5kW Hatz diesel, an 8.7kW Honda petrol engine and a lithium-ion battery pack for emissions-free operation.

Ecomeca from Finland says it has developed a new innovation in the field of crusher buckets that increases productivity. The company has different models available for excavators from 18-50tonnes, including models that can be installed on wheeled loaders. It is highlighting its Ecomeca 145 model, which can be installed onto 28-40tonne excavators. “The concept Ecomeca has developed is backed up by several patents and patent applications in more than 40 countries,” says the company. “The Ecomeca

Weckenmann Anlagentechnik says the response from selected customers was exceptionally positive, when it presented its “innovative concept” of transportable formwork, the Mobile Battery Mould (MBM). It is a system for the production of precast concrete elements in the immediate vicinity of the construction site, and Weckenmann Anlagentechnik says that two large construction companies in Singapore opted for the MBM concept independently of one another. Both production plants have started operations successful

BOMAG has upgraded its compact city paver, increasing output while reducing exhaust emissions and fuel consumption. A new engine meets the Tier 4 Interim/Stage IIIB emission standard, while a Tier 3/Stage IIIA diesel can also be fitted for markets where low sulphur fuel is not available. Customers can also choose from wheeled or tracked variants. The Ecomode regulates the hydraulics, engine speed and ventilation as required, saving fuel and reducing noise. The BF300-2 offers a throughput of 300tonnes/ho