News

ZF used bauma 2013 to show the next stage of development for its cPower continuously variable transmission (CVT). By combining the transmission with a hybrid module, ZF said greater operating efficiencies were available from the integration of start/stop technology and energy recovery from regenerative braking. Potentially, the hybrid drive system has the ability to boost fuel efficiency by up to 25% in addition to the 20% higher operating efficiency already offered by the cPower transmission, said ZF.

The new Tier 4 Final/Stage IV emission certified engine range from Deutz is being introduced. This complete line-up of diesels meets the coming noise and exhaust emission requirements in Europe and the US and offers capacities from 2.9-16litres. The low emissions performance is achieved using the Deutz DVERT technology, a package of technical solutions that is used in modular form with varying options used to ensure each engine capacity meets the requirements. Compact design and high torque output are claim

Perkins will showcase a complete line-up of Stage IV/Tier 4 Final engine solutions at Bauma, ahead of the new legislation next year. The four cylinder 854F-E34TA will demonstrate much of the technology on offer, as it uses Selective Catalytic Reduction (SCR) with an exhaust additive, plus a Diesel Oxidation Catalyst (DOC). Both Perkins’ 3.4 and 4.4-litre engine lines make do without a Diesel Particulate Filter (DPF), though the larger 7 litre will use a DPF as well.

Engine supplier Yanmar will show a full range of California Air Resources Board (CARB) certified engines at Bauma. The company claims to be the first engine manufacturer to achieve the CARB accreditation across its complete line-up in the 19-56kW (25-75hp) range, and the engines all meet the US Tier 4 Final standard too. The firm will also announce an electronic diagnostic service system called Smart Assist-Direct. The system allows rapid updates of engine software and can automatically retrieve technical s

Hatz Diesel will take the wraps off a new engine family at Bauma, with the launch of the H series, a 2.0–litre water-cooled engine family that features Bosch common rail fuel injection with pressures up to 1,800 bar. Producing 56kW (75hp) and 130Nm of torque, the engine meets European Stage IIIB emissions regulations and US Tier 4 Final standards. The engine, a first at this size for the company with liquid-cooling, uses exhaust gas recirculation (EGR) and a diesel oxidation catalyst (DOC) but does without

The Kohler/Lombardini group will use Bauma to update its range of air-cooled single cylinder diesel engines, unveiling the new 8kW KD15-440 engine which the manufacturer says will strengthen and improve the current 15LD series - elevating it to the top of the class within its power range. The KD15-440 is an air-cooled single cylinder diesel engine with a displacement of 441cc and an air filter that can offer, Lombardini claims, an operating life five times greater than the current version via its new high-e

Japanese engine manufacturer Kubota will use Bauma to announce its plan to build another engine plant in Wuxi City, China for the production of vertical-shaft diesel engines. This facility has 18,000 m2 of manufacturing space and will be a fully-owned subsidiary of Kubota China Holdings Co. Production levels will reach 97,000 engines a year and operations start in 2014. Once opened, Kubota will have 6 manufacturing plants around the world for diesel engines.

JCB’s Ecomax engine – the company’s innovative solution to EU Stage IIIB/US Tier 4 emissions legislation - will be on show for the first time at bauma as machines powered by it make their debut. The UK-based construction equipment manufacturing giant claims it is the only leading equipment manufacturer in the world to have met the stringent Stage IIIB/Tier 4 interim emissions legislation without the use of diesel particulate filter (DPF) or after-treatment – resulting in the world’s cleanest and most effici

The Cummins Engine stand this year’s Bauma will be dominated by one of the largest engines at the show, alongside one of the smallest. The firm will show a 37kW (49hp) 2.8-litre QSF2.8 alongside its giant QSK95, which delivers 3,130kW (4,200hp). These two engine highlight extensions to both ends of the Cummins offering, one of the broadest in the industry that is capable of meeting the coming Stage IV/Tier 4 Final emissions legislation.

SKF Insight features intelligent wireless technology that enables bearings to communicate their operating conditions continuously, with internally powered sensors and data acquisition electronics. Bearings have long been considered the heart of rotating machinery but now SKF has made them the brain as well.

Dana used bauma 2013 to show a hydraulic hybrid concept for use with wheeled loaders, offering the potential to reduce fuel consumption by 20-40%. Called PowerBoost, the system uses high-pressure hydraulic accumulators to store up fluid power that can be released to assist the engine in driving hydraulic pumps and motors. “PowerBoost offers hydraulic power assistance to almost any machine function, to prevent peak loads on the engine during short duty cycles such as loading,” said Donald Remboski, Dana vice

Dana Holding Corporation used bauma 2013 to reveal its Spicer TE30 powershift transmission for heavy-duty materials handling applications. With five forward and three reverse speeds, the TE30 slots into the range between the TE27 and TE32 transmissions, and is compatible with engines ranging from 225-300kW. The Spicer TE30 transmission benefits from several engineering refinements to improve efficiency. These include decreased spinning speeds of internal components to lower oil churning losses, optimised cl