Yanmar Europe is using Intermat to reveal a new series of water-cooled industrial diesel engines that meet the new EPA Tier 4 and EU Stage IIIB off-highway emission regulations up to 56kW. Based on its TNV series, the new range includes 10 models in three- and four-cylinder formats with indirect and direct injection, and ranging from 10kW to 56kW. Four of these new engines, the 3TNV80F, 3TNV88C, 3TNV86CT and 4TNV98C, will be shown at Intermat 2012. Engines over 19kW use an ECU-controlled common rail fuel in
April 13, 2012
Read time: 1 min
2293 Yanmar Europe is using Intermat to reveal a new series of water-cooled industrial diesel engines that meet the new EPA Tier 4 and EU Stage IIIB off-highway emission regulations up to 56kW. Based on its TNV series, the new range includes 10 models in three- and four-cylinder formats with indirect and direct injection, and ranging from 10kW to 56kW. Four of these new engines, the 3TNV80F, 3TNV88C, 3TNV86CT and 4TNV98C, will be shown at Intermat 2012. Engines over 19kW use an ECU-controlled common rail fuel injection, cooled EGR, a new throttle valve and a diesel particulate filter (DPF). A new diagnostic system called Yanmar SA-D, and the remote monitoring system Yanmar SA-R, provide real-time engine status and allow pro-active servicing to be carried out.
Yanmar Europe is using INTERMAT to reveal a new series of water-cooled industrial diesel engines that meet the new EPA Tier 4 and EU Stage IIIB off-highway emission regulations up to 56kW. Based on its TNV series, the new range includes 10 models in three- and four-cylinder formats with indirect and direct injection, and ranging from 10kW to 56kW. Four of these new engines, the 3TNV80F, 3TNV88C, 3TNV86CT and 4TNV98C, are at INTERMAT 2012. Engines over 19kW use an ECU-controlled common rail fuel injection, c
Launched at INTERMAT in prototype form, the SV100-1 is now Yanmar’s largest excavator. Tipping the scales at 10.3tonnes, the reduced tailswing midi excavator gets a two-piece boom and additional counterweight. Powered by a 54.7kW 4TNV98T engine, the excavator offers a 4.48m dig depth, sits on 450mm wide rubber tracks, and measures 2.3m wide. A fourth auxiliary circuit is available as an option.
Hatz Diesel will take the wraps off a new engine family at Bauma, with the launch of the H series, a 2.0–litre water-cooled engine family that features Bosch common rail fuel injection with pressures up to 1,800 bar. Producing 56kW (75hp) and 130Nm of torque, the engine meets European Stage IIIB emissions regulations and US Tier 4 Final standards. The engine, a first at this size for the company with liquid-cooling, uses exhaust gas recirculation (EGR) and a diesel oxidation catalyst (DOC) but does without
