The modular design can have up to 100 pairs of filters to cope with flows up to 9,000lit/min and each pair has an individual drain, making it easier to locate breached filters. For ease and speed of replacing breached filter material, the high-beam design incorporates a handling system to remove the relevant filter.
Contaminants from 3mm down to a few microns are captured by the filters with 95% of the water removed for re-use. When the operation allows, the twin pump system is adjusted using an inverter to reduce the working pressure and lower energy consumption.
Maximum sludge capacity is 10m3/cycle and the cakes are discharged by gravity. Water cleanliness meets the Italian 80mg/lit limit for discharging water to rivers and lakes and even tighter levels can be met using sand bed filtration after-treatment.
Stand: B2 207
RSSView more stories
