Ramtec adds four new ranges of sorting and demolition grabs
Rotar will use Bauma to launch a new range of attachments with the new RDC Series shears, the RDP Series pulverisers and the RHB Series hydraulic hammers. A new RG Series grab will also be unveiled for excavators from 2tonnes to 60tonnes. The RG range uses a double-framed main housing for stability and the rotator head is driven by a Parker motor with an integrated cross-over valve. The single centred cylinder is standard fitted with a load-control valve. The RHB hydraulic breakers are amongst the quietest
February 15, 2013
Read time: 2 mins
Rotar's tough new RHB hydraulic hammer has only two moving parts
7162 Rotar will use 688 Bauma to launch a new range of attachments with the new RDC Series shears, the RDP Series pulverisers and the RHB Series hydraulic hammers. A new RG Series grab will also be unveiled for excavators from 2tonnes to 60tonnes. The RG range uses a double-framed main housing for stability and the rotator head is driven by a Parker motor with an integrated cross-over valve. The single centred cylinder is standard fitted with a load-control valve. The RHB hydraulic breakers are amongst the quietest on the market, says Rotar, and they use only two moving parts. The central lube reduces down-time and provides optimal lubrication during operation. The new demolition and scrap shear attachments are available in a wide variety of sizes, says Rotar, and have been designed to reduce back pressures, temperatures and fuel consumption rates.
Attachments specialist Ramtec is adding three new hydraulic hammers to its range at Bauma. The BH32, BH40 and BH52 backhoe hammers will be marketed under the Robi brand and the key features are high oil flows for high impact frequency, greater productivity levels and more penetration effort; constant blow energy to ensure constant strength; and low fuel consumption rates. All of the new backhoe hammers have sound suppression housing as standard, says Ramtec. The Finnish manufacturer will also unveil a new c
Sennebogen’s new 655 HD heavy-duty cycle crawler crane is one of several innovations on the company’s stand at Bauma. Designed for heavy-duty tasks on construction sites and in the extractive industry, the 655 D can be used with a dragline bucket or in foundation construction. The 55tonne capacity machine can be used with a 3.5m3 Hendrix dragline bucket, for instance, and it uses two 16tonne winches driven by high-pressure regulated variable displacement hydraulic motors. There is a continuously-variable fr
