Skip to main content

New formwork range from Paschal

PASCHAL is expanding the LOGO.pro wall formwork range with the panel height of 340cm for even faster forming of large areas.
October 11, 2022
LOGO.pro has now been expanded to include the new panel height of 340cm
LOGO.pro has now been expanded to include the new panel height of 340cm

For almost three years, Paschal’s LOGO.pro wall formwork with one-sided anchor technology has been significantly optimising time and cost expenditures on the construction site.

LOGO.pro has now been expanded to include the new panel height of 340cm allowing it to shutter even larger wall heights. All this without the additional extension of segments or needing only two panels to reach a height of up to 6.80m, for example.

Due to the large dimensions, there are fewer panel elements per wall surface and therefore also fewer accessories – and in particular connecting parts – to be mounted. This significantly reduces not only shuttering times, but the cost of materials used.

In addition to the new large-size panel 240cm x 340cm, the LOGO.pro formwork panels are available in panel centimeter widths of 135, 90, 75, 60, 45 and 30, as well as matching inside and outside corner posts.

At the heart of the LOGO.pro formwork system are exchangeable sleeves made of steel. The guide bushings built into the formwork are equipped with a conical access opening in the appropriate diameter for DW15 and DW20 tie rods. This means that the classic type of two-sided anchoring is possible.

To change over to one-sided anchoring, the guide bushings on the side of the adjustable formwork are merely replaced with clamping units.

Both anchor variants use standard material and cladding tubes can be selected as required.

For more information on companies in this article

Related Content

boombox1
boombox2