News

American rock drilling tool maker, Rockmore International, has opened its first manufacturing plant in Europe to serve customers in the emerging Africa and Asia markets. The new plant, based in Judenburg, Austria, represents an investment of $12million. With Rockmore’s existing plant in the USA, it effectively doubles the company’s production capacity.

Cost cutting in sign design can lead to confusion: Image provided courtesy of World Highways reader Helen Marais

JLG has launched the 10MSP, a stock picker with a platform height of 3.05m and an overall width of just 0.83m. The platform capacity is 159kg, with a material tray capacity of 113kg. The 10MSP uses a joystick to steer and drive, with turn-on-the-spot capability for ultimate manoeuvrability,

Italian technology company Outset has introduced two additional on-board weighing systems. The Lanx WL is a wireless control unit designed for use on road-going tipper trucks. It provides a real-time display of the net, gross, trailer and tractor axle weights, with an acoustic alarm to prevent overloading. The Lanx HD is intended for use in rigid dump trucks, and is directly installed in the cab. It displays the weight on board, allowing readings for each axle, and memorise round-trips for later download.

One company at INTERMAT probably deserves ‘ten stars’ for safer cost-effective construction machine operator training. Established in 2009, Swedish firm Tenstar Simulation (TS) offers simulator training programs for new operators of a wide spectrum of construction machines, including wheel and truck excavators, wheel loaders, and tower and lorry cranes.

French manufacturer Haulotte has reported sales of €89m in the first quarter of 2012, compared with €72.1m for the same period last year. Equipment sales were up 28.4% and represent 78.5% of total revenue, while service and rental revenues rose by 2% and 14.1% respectively. “Overall we see a pretty good market around the world in 2012,” said chief executive Alexandre Saubot. “I am still concerned by Europe, which will have the slowest growth this year. But overall we are confident that we will achieve doubl

Ihimer, the joint venture between Japanese company IHI and Italian firm Imer, has added two skid steer loaders to its growing range of compact equipment. The AS30 and AS34 have operating weights of 3,150kg and 3,500kg respectively, with rated working loads of 850kg and 1,020kg. Power comes from a 50kW Kubota engine in the smaller machine and a 61kW Yanmar motor in the AS34. The company already has a smaller AS12 model, and will launch AS18 and AS22 skid steers at next year’s Bauma show in Munich. IHI also b

Chemical company Evonik has formulated an additive pack that creates multi-grade hydraulic oil for excavators. It is said to deliver a significant improvement in fuel efficiency compared to traditional mono-grade hydraulic oils. It’s called Dynavis and the key, said Evonik, is a clever viscosity improver that prevents aeration, which can cause cavitation and a loss of performance in hydraulic pumps. Dynavis’ technology is a closely guarded secret - it is not available as a pour-in additive, but is sold in

Kobelco used INTERMAT for the European introduction of its G series CKE range of crawler cranes –displaying the CKE2500G and the CKE800G, with lifting capacities of 250tonnes and 80tonnes respectively. Both benefit from lower fuel consumption of up to 25% partly attributed to their Stage IIIB engines having an auto idle stop (which cuts the engine if it is idling and automatically re-starts it as soon as a control is touched) and the G Winch that retains its winching speed even if the engine revs are reduce

Shantui Construction Machinery intends to grow both organically and by acquisition, according to vice president Li Dianhe. The company has relied heavily on its bulldozer line in the past but is developing a wider product range. It has bought Chinese firms making concrete equipment and road machines and is actively looking at further potential acquisitions. Dianhe said, “We are still negotiating.” Although it is very strong in China, and particularly with its bulldozers, exports are an important part of

ENH may operate in 60 countries but its bitumen emulsion plants are relatively new to the French market. But interest from French contractors at the show is proving high, said managing director Erik Haugaard. Mobile ENH equipment is typically used for producing a mix for road repairs. Basing the ENH mill near to where repairs are taking place enables the patching equipment to return at regular intervals for a new supply of material.

Atlas Copco, which is opening a new competence centre in Europe, is to move a divisional headquarters to China and has also hinted at further acquisitions. The new Atlas Copco Generator Competence Centre in Zaragoza, Spain, is scheduled to be in full operation by 2013, and is subject to final approval by local authorities. The decision to launch the centre for generators was announced by Atlas Copco’s portable energy division at INTERMAT.

Dominating Hidromek’s stand at INTERMAT is its 30.5tonne HMK300LC excavator. In common with the other gen series excavators, the HMK300LC has Hidromek’s latest cab design, which offers more room for the operator and the “Opera” user interface designed to optimise the excavator’s force, speed and consumption.

Inan Makina is best known as a breaker company but has greatly expanded its range in the last year to meet customer demand for other types of attachment. Breakers are joined on the stand by examples from its other lines, which now include hydraulic compactors, augers, pulverisers, crushers and sorting grabs. Among the breakers at the show is the 5tonne MTV 505, which is one of the largest models in the range. Some 60% of Inan Makina’s products are for its local Turkish market and 40% for elsewhere. Vice cha