Auger Torque has introduced a torque measuring device which fits between its auger drivers and the dipper end and measures the torque applied to screw anchors. A Bluetooth readout shows the torque applied enabling contractors top confirm they have achieved the minimum depth and torque requirements set by the civil engineer.
April 18, 2012
Read time: 1 min
5014 Auger Torque has introduced a torque measuring device which fits between its auger drivers and the dipper end and measures the torque applied to screw anchors. A Bluetooth readout shows the torque applied enabling contractors top confirm they have achieved the minimum depth and torque requirements set by the civil engineer.
Auger Torque has introduced a torque measuring device which fits between its auger drivers and the dipper end and measures the torque applied to screw anchors. A Bluetooth readout shows the torque applied enabling contractors top confirm they have achieved the minimum depth and torque requirements set by the civil engineer.
It’s a case of entering a new Hemisphere for one Canadian firm at INTERMAT. Hemisphere GPS is highlighting its wide range of machine control and guidance systems during its show debut. The ergonomic Earthworks Z300 for dozers, a new system being exhibited by the Calgary-based firm, is said to improve grade control accuracy while reducing rework and the number of required passes.
A further new Hemisphere GPS system on show is the S320 GNSS Survey Receiver. The model includes SMS communication, GSM auto cor
Ammann has introduced the ACEeco compaction measuring system for its five model AVH hydraulic plate range. As an extra cost option, the system uses a compaction display that indicates the compaction progress using an LED scale. The system also displays the maximum compaction level achievable and this, said Ammann, will help operators to avoid making unnecessary passes and over-compaction. Available for AVH5020, 5030, 6020, 6030 and 100-20 models, which have operating weights from 530–555kg and working width
Ammann has introduced the ACEeco compaction measuring system for its five model AVH hydraulic plate range. As an extra cost option, the system uses a compaction display that indicates the compaction progress using an LED scale. The system also displays the maximum compaction level achievable and this, said Ammann, will help operators to avoid making unnecessary passes and over-compaction. Available for AVH5020, 5030, 6020, 6030 and 100-20 models, which have operating weights from 530–555kg and working width
