Liebherr has added a second model to its articulated hauler range with the TA240. The 40 tonne capacity truck has a 27m3 body and a 6x6 driveline. Power comes from a 16.2 litre Stage IIIB Liebherr V8 diesel engine delivering 350kW (476hp). This enables the truck to reach maximum speeds of up to 57km/h. A high performance retarder helps to bring the truck to a halt and can be preselected, with both the engine brake and the retarder working as soon as the driver lifts their foot from the throttle pedal. Wet,
February 8, 2013
Read time: 2 mins
718 Liebherr has added a second model to its articulated hauler range with the TA240. The 40 tonne capacity truck has a 27m3 body and a 6x6 driveline. Power comes from a 16.2 litre Stage IIIB Liebherr V8 diesel engine delivering 350kW (476hp). This enables the truck to reach maximum speeds of up to 57km/h. A high performance retarder helps to bring the truck to a halt and can be preselected, with both the engine brake and the retarder working as soon as the driver lifts their foot from the throttle pedal. Wet, multi-disc service brakes provide ultimate retardation when required.
A large touch-screen monitor in the cab provides a constant display of vehicle systems and can be used to display the image from the standard front and rear-view cameras. The truck has spring-damper units on the front axle to deliver a comfortable ride. All of the hydraulic rams, for the dump body and steering system, are produced in-house by Liebherr along with the touch-screen display, cameras and wiring harness.
Liebherr is launching a revised R922 crawler excavator, replacing the previous R906 and joining the R918 and R926 in the company’s medium weight line-up. Powered by a Stage IIIB Liebherr diesel engine, developing 105kW (143hp), the R922 weighs in at 22 tonnes and designed as a general purpose civils machine. Using a Dual Circuit Positive Control hydraulic system, the excavator is said to consume less energy than previous models, resulting in fuel savings for the customer. The machine on show will be exhibit
Liebherr will show a modular design flat-top tower crane in the 150EC-B at this year’s Bauma. The 150EC-B is available in FR.tronic, with traditional contractor controls, or Litronic version with programmable logic controls. The flat-top crane can be had in 6 tonne and 8 tonne versions, with a maximum hook height of 63m and maximum working radius of 60m. Lift capacity at full radius is 1,700kg.